FPNO-21 PROFINET IO Adapter Module
Manufacturer: ABB
Images are representations only.
FPNO-21 PROFINET IO Adapter Module
Manufacturer: ABBThe PROFINET IO interface module, FPNO-21 that is certified according to Conformance Class B (CC-B) supporting PROFIdrives and ABB drives profiles.
This module contains the embedded switch for Media Redundancy Protocol (MRP) configuration therefore saving your time and cost to buy and install an extra switch.
This adapter module is compatible with ABB’s common architecture drives.
FPNO-21 is compatible with ACS380, ACS480, ACS580, ACH580, ACH480, ACQ580 and ACS880 drives.
Features- The two ports of FPNO-21 works as an embedded switch that supports Media Redundancy Protocol (MRP) without the requirement to use an external switch.
- Easy to configure name via PLC programming environment as PROFINET station is named by index parameter (i.e. abbdrive-xx)
- Easy to change the drive without special tools to rename the PROFINET station as PROFINET station is named as a part of drive’s backup file.
- PROFINET “drive control” and “PROFIsafe” can be used by separate PLCs through Shared Device support. Shared Device enables accessing one drive from two controllers via one FPNO-21. (i.e. one PLC to control the drive, other SafetyPLC for safety communication)
- Support PROFIsafe over PROFINET. To use PROFIsafe, FSO-12 or FSO-21 with ACS880 is required.
- Support SNTP protocol for the time synchronization.
- Drive Composer Pro software can be used with FPNO-21 to perform a start-up or maintenance for ABB common architecture drives.
