ACS880-31 Wall-Mounted Ultra-Low Harmonic Single Drive

Manufacturer: ABB

ACS880-31 Wall-Mounted Ultra-Low Harmonic Single Drive

Manufacturer: ABB
Our ultra-low harmonic drives produce exceptionally low harmonic content and exceed the requirements set by low harmonic recommendations. 

The compact ACS880-31 drive has harmonics mitigation built-in. 

This includes an active supply unit and integrated low harmonic line filter. So there is no need for external filters, multi-pulse arrangements or special transformers. 

By managing and controlling harmonics, the ACS880-31 reaches unity power factor.

The active supply unit in the drive is able to boost output voltage to guarantee full motor voltage even when the supply voltage is below nominal. 

The drive also offers the possibility for network power factor correction to compensate for low power factors of equipment connected to the same network.
Features
  • Power range 2.2 to 110 kW / 380 to 500 V
  • IP20, IP21 and IP55 enclosure classes - flange mounting possibility as an option
  • Total harmonic current distortion typically <3% in nominal situation and undistorted network
  • One compact drive package - no additional hardware needed
  • Simple and cost-efficient installation
  • Factory tested solution for high reliability
  • Built on ABB’s common drives architecture
  • Direct torque control (DTC) as standard
  • Integrated safety including STO as standard
  • Supports a wide range of fieldbus protocols, I/O and encoder options
  • Flexible I/O and encoder options

Specifications

Manufacturer

Voltage & Power Range

  • Mains: 3-Phase, UN3 380-415 V, +10 %/-15 %
  • Motor: 3-Phase output Voltage 0 to UN2 /UN3 /UN5 /UN7
  • 2.2 to 110 kW
  • Mains, 3-Phase, UN5 380-500 V, +10 %/-15 %

Frequency

  • Motor: 0 to ± 598 Hz
  • Mains: 50/60 Hz ± 5 %

Efficiency

  • 97 % at nominal Power

Motor Control

  • Direct torque Control (DTC)

Certifications & Approvals

  • UL, CSA
  • TÜV
  • RCM, EAC
  • ATEX
  • EMC
  • LVD
  • CE
  • RoHS

Storage / Transport Temperature

  • -40° to 70° C

Operating Temperature

  • -15° to 40° C as Standard
  • 40° to 55° C with Derating of 1 %/1° C

Cooling Type

  • Dry Clean Air Cooling

Altitude

  • 0 to 1,000 m without derating
  • 1,000 to 4,000 m with derating of 1 %/ 100 m

Humidity

  • 5 % to 95 % Relative Humidity, no condensation

Environmental Protection

  • IP20
  • IP21
  • IP55

Documentation

show more