Weatherproof Buzzer EKS EKSP
Manufacturer: EATON | FHF
Images are representations only.
Weatherproof Buzzer EKS EKSP
Manufacturer: EATON | FHFThe Electronic Buzzers EKS and EKSP are installed into a 28 mm bore hole in control panels.
With a volume of approx. 90 dB(A) both models are suitable for universal signaling purposes.
The electronics of the EKS and EKSP buzzers are installed into an impact-resistant thermoplastic housing.
It is connected to the power supply via a 6.3 x 0.8 mm flat connector. The audio frequency is approx. 2.0 to 2.5 KHz for all models.
While the EKS produces a continuous tone signal, the EKSP version emits a pulsating tone signal.
Features- Installation in control panels
- Low current consumption
- Loud piezo sounder
- Housing of impact-resistant thermoplastic
- Continuous tone/Pulsating tone
Specifications
Manufacturer
Housing
- Thermoplastic (ABS)
Colour
- Grey
Ingress protetction
- IP 30, connection IP 00 according to IEC 60529
Connector
- Flat connector 6.3 x 0.8 mm
Volume
- Approx. 90 dB(A), in 1 m distance at nominal voltage
Signal
- Type EKS Continuous tone (2.5 kHz)
- Type EKSP Pulsating tone (2.5 kHz, pulse frequency approx. 2 Hz)
Operating mode
- Continuous operation
Temperature range
- -50 °C to +60 °C
Weight
- 0.055 kg
