WM3000-001

Series: Analog Output Module Manufacturer: OleumTech

Add More Analog Outputs to a DH1 Gateway

Price
Request a Quote
Stock
In Stock 14 - 24 days

The OleumTech® Analog Output Module is designed for conveniently implementing up to four analog outputs to the DH1 Base Unit Wireless Gateway. 

Each output can be independently selected for either 1-5 Vdc (3-wire) or 4-20 mA (2-wire) mode of operation.

The Analog Output Module is certified for use in Class I, Division 2 (Zone 2) hazardous locations and accepts 9-24 Vdc external power.

Its compact, small footprint form factor easily fits inside a NEMA enclosure. 

This Module is equipped with two RS485 Serial ports (RJ-45) for allowing multiple I/O Modules to be daisy-chained to the DH1.

Specifications

Manufacturer

Device Functionality

  • Analog Output Expansion Module for DH1 Wireless Gateway

Device Interface

  • Standard RS-232 Serial

I/O Interface

  • 4x Analog Outputs

Resolution

  • 12-bit ADC

Interface

  • RS-485 (2-Wire)
  • 9,600/19,200 Baud
  • Modbus/RTU Protocol

Certifications & Approvals

  • Over Voltage Rating: Transient Voltage Suppressor on Each Port
  • Class I, Div. 2, Groups A, B, C, D T4, Ex nA IIC T4
  • Class I, Zone 2 AEx nA IIC T4, 9-30 Vdc, Ta = -40 to 176° F (-40° C to +80° C)
  • ATEX: Sira 14ATEX4143X, Ex nA IIC T4 Gc
  • IECEx: SIR 13.0055X, Ex nA IIC T4 Gc, 9-30 Vdc, Ta = -40 to 176° F (-40° C to +80° C)

DC Power Input

  • 9-24 Vdc

Operating Conditions

  • -40° C to 80° C
  • Humidity: 0 to 99 % Non-Condensing

Documentation

show more